Hey guys, I Reset my module and replace all components, after an accident, but I still have this code "U11F0-00 Lost communication with left Impact Pressure Sensor" and U11EB-00. Can you help me to solve this issue, do I need to replace sensor or check connections? whet sensor is this and where is located. Thanks in advance
Did you ever find out where that sensor was? I have a 2013 town and country with the air bag light on all the time. When i scan for codes i get U11F0. My scanner does not give me any more information than that. Anything to help would be great.
The impact sensors are mounted to the plastic core/radiator support a few inches below the headlights. They are green with a two wire plug and held on with a small torx bolt. A bit challenging to get to with the headlight in place, and of course to get the headlight out requires removal of the front bumper cover and grille. The two front ones are the same if I recall, so could swap from side to side to see if issue moves with sensor. Sometimes they fail after an accident even if still in one piece.
I had the same problem with this code wire tracing til i found that in the door jam on the drivers side front door that the wire had been cut from excessive opening and closing of the door and i ended up solving the problem after that also check under the seat for corrosion or severed wires
I got the same code out of nowhere cleared it and it went away. I have removed my headlights a few times now so I may have disturbed the sensor. I’ll have to check for wire continuity.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
The Chrysler Minivan Fan Club Forums
572K posts
80.4K members
Since 2003
ChryslerMinivan.net is the best forum for Chrysler Town and Country owners to discuss mileage, price, problems, towing and more. Join now!